Products

Complete Pole 2 Section Mini Pole with thread and hose assembly. Also includes residential brush and angle crank.

The Ionic Systems Caddy™️ is a simple system that allows water fed cleaning wherever there is access to a water supply.

There are four Caddy™ configurations: A single DI, a double DI, a triple DI and a triple multi-stage filtration system which includes DI, Carbon and RO. All of them come seated in a metal frame with a carry strap.

Units can be chosen from De-Ionization (DI) in soft-water areas where Reverse Osmosis (RO) isn't necessary to RO for hard water areas.

Providing adequate water pressure (50psi/3.5 bar min) is available at the water source, the Caddy™ system can supply an adequate stream of pure water for cleaning...up to 45ft in most cases.

Note: The single system has one polymer housing, the double system has two polymer housings and the triple has three polymer housings.

PERFORMANCE The Ionic System RO/DI Caddy produces up to 1 liter per minute when running at optimal operating pressure (60 psi). The amount is dictated by the incoming water pressure. The maximum should be 80 psi.
*Please check out our article on Winterizing your Ionic Window Cleaning Systems to keep your system in tip top shape through the winter.

If you are needing a water softener caddy then click here.

Video

Included Items

Single, Double or Triple Caddy with metal frame and carrying strap.

OR

Single Di Caddy with metal wallmount.

The Ionic Systems Caddy™️ in-line water softener is a simple system ideal for water softening onsite. 

This portable caddy is easily carried and connects in-line between the water supply and your pure water machine.

This system has a multitude of uses like window cleaning and mobile detailing but is mainly needed in areas with very hard water.

There are three Caddy™ configurations: A single, a double and a triple filtration system.

PLEASE NOTE: We have pictured all three sizes on this listing. The single will have one filter, the double will have two filters and the triple will have three.

*Please check out our article on Winterizing your Ionic Window Cleaning SystemsHow to Winterize Your Ionic Window Cleaning System to keep your system or caddy in tip top shape through the winter.

Regeneration

• Standard Regeneration Frequency:
• Most experts recommend a regeneration cycle every 2-3 days to maintain efficiency.
• Factors Influencing Regeneration Timing:
  • Water Hardness: Harder water requires more frequent regeneration.
  • Water Usage: Higher water consumption accelerates the need for regeneration.

Please see below for a helpful chart:

How to Regenerate

Video

Included items

Single, Double or Triple Water Softener with metal frame and carry strap. Each system comes with a Salt Back Wash Canister and two quick connect hoses.

Constant Flow Spray Nozzle

Can be inserted into the Hydra Vertigo Quick Release Pole for high-reach foaming action.

Constant Flow Touchless Foam Spray System by Ionic Systems

The Constant Flow Touchless foam spray system uses Smart Pressure Technology packaged in a detachable, rechargeable, lithium ion power pack which electronically pressurizes and maintains the air pressure in the tank. Due to the latest power density technology, the lithium ion power cells are maximized when air is pressurized in the tank.

This leads to a full day of spraying with just one charge! it provides the optimum pressure for even distribution of Contact chemical foam – no more pumping and guessing if the pressure is correct. Constant Flow allows for precision delivery of chemicals and a reduction in spray time.

The Power Pack is easy-to-use, just attach it to the tank with just a push and a click, turn it on and it automatically starts working. To remove, just rotate the knob while the tank is still under pressure. 

• Automatic smart pressure technology that eliminates manual pumping
• Continuous equal flow rate
• One charge can last a full day’s use
• 2.5 Gallon (9.5 litre) capacity

Endura Water Fed Pole: Unmatched Control and Durability

The Endura Water Fed Pole sets a new standard in professional window cleaning with its advanced anti-rotational technology and patented clamp designs. Engineered for superior control and efficiency, this innovative tool offers exceptional durability and ergonomic comfort, ensuring ease of use and extended longevity. The Endura’s cutting-edge clamp system enables quick adjustments and secure locking during operation, making it the ideal choice for professionals seeking a high-performance cleaning solution.

Revolutionary Anti-Rotational Design

In 2016, Ionic Systems began developing an anti-rotational water fed pole to address a common challenge faced by window cleaning professionals. Years of research and development led to the creation of a unique clamping system that minimizes tube wear over time while preventing unwanted rotation—even when components experience natural wear. The Endura Water Fed Pole is the culmination of this effort, delivering a robust, long-lasting tool built to withstand the demands of daily use.

Below is a list of all the types of Endura poles available. 

• Grafter
• Swift
• Vertigo Standard
• Vertigo Quick Release
  

Choose reach from the drop down menu. 

Videos

Disclaimer: This video is the property of its original creator or manufacturer and is provided here for informational purposes only. Clean Direct does not claim any rights to this content and is not responsible for its accuracy or representations.

Included

• One Endura pole in specified size
• 12" Double Trim Brush
• Angle Crank

Does not include Fly Lead. 

Specifications

CF 24ft Pole - Collapsed 5.2ft / 1.6m, Weight 3.5 lbs / 1.6kg, Handle Diameter 1.5 inches / 38mm

CF 32ft Pole - Collapsed 5.2ft / 1.6m, Weight 5 lbs / 2.3kg, Handle Diameter 1.8 inches / 46mm

CF 45ft Pole - Collapsed 6.3ft / 1.9m, Weight 7 lbs / 3.2kg, Handle Diameter 2 inches / 50mm

CF 55ft Pole - Collapsed 7.3ft / 2.1m, Weight 10 lbs / 4.5kg, Handle Diameter 2.13 inches / 54mm

Endura Water Fed Pole: Unmatched Control and Durability

The Endura Water Fed Pole sets a new standard in professional window cleaning with its advanced anti-rotational technology and patented clamp designs. Engineered for superior control and efficiency, this innovative tool offers exceptional durability and ergonomic comfort, ensuring ease of use and extended longevity. The Endura’s cutting-edge clamp system enables quick adjustments and secure locking during operation, making it the ideal choice for professionals seeking a high-performance cleaning solution.

Revolutionary Anti-Rotational Design

In 2016, Ionic Systems began developing an anti-rotational water fed pole to address a common challenge faced by window cleaning professionals. Years of research and development led to the creation of a unique clamping system that minimizes tube wear over time while preventing unwanted rotation—even when components experience natural wear. The Endura Water Fed Pole is the culmination of this effort, delivering a robust, long-lasting tool built to withstand the demands of daily use. Even with the clamps open, the tube sections simply won’t spin!

Below is a list all the types of Endura poles available. 

• Grafter
• Swift
• Vertigo Standard
• Vertigo Quick Release
  

Choose reach and brush size from the drop down menu. 

Videos

Disclaimer: This video is the property of its original creator or manufacturer and is provided here for informational purposes only. Clean Direct does not claim any rights to this content and is not responsible for its accuracy or representations.

Included

• One Endura pole in specified size
• 14" or 18" Dual Trim Brush Head Assembly with 9" Gooseneck 

Does not include Fly Lead. 

Specifications

CF 24ft Pole - Collapsed 5.2ft / 1.6m, Weight 3.5 lbs / 1.6kg, Handle Diameter 1.5 inches / 38mm

CF 32ft Pole - Collapsed 5.2ft / 1.6m, Weight 5 lbs / 2.3kg, Handle Diameter 1.8 inches / 46mm

CF 45ft Pole - Collapsed 6.3ft / 1.9m, Weight 7 lbs / 3.2kg, Handle Diameter 2 inches / 50mm

CF 55ft Pole - Collapsed 7.3ft / 2.1m, Weight 10 lbs / 4.5kg, Handle Diameter 2.13 inches / 54mm

Endura Water Fed Pole: Unmatched Control and Durability

The Endura Water Fed Pole sets a new standard in professional window cleaning with its advanced anti-rotational technology and patented clamp designs. Engineered for superior control and efficiency, this innovative tool offers exceptional durability and ergonomic comfort, ensuring ease of use and extended longevity. The Endura’s cutting-edge clamp system enables quick adjustments and secure locking during operation, making it the ideal choice for professionals seeking a high-performance cleaning solution.

Revolutionary Anti-Rotational Design

In 2016, Ionic Systems began developing an anti-rotational water fed pole to address a common challenge faced by window cleaning professionals. Years of research and development led to the creation of a unique clamping system that minimizes tube wear over time while preventing unwanted rotation—even when components experience natural wear. The Endura Water Fed Pole is the culmination of this effort, delivering a robust, long-lasting tool built to withstand the demands of daily use. Even with the clamps open, the tube sections simply won’t spin!

Below is a list of all the types of Endura poles available. 

• Grafter
• Swift
• Vertigo Standard
• Vertigo Quick Release
  

Choose type and size from the drop down menu. 

Videos

Disclaimer: This video is the property of its original creator or manufacturer and is provided here for informational purposes only. Clean Direct does not claim any rights to this content and is not responsible for its accuracy or representations.

Included

• One Endura pole in specified size
• 14" or 18" Dual Trim Brush Head Assembly
• 6", 9", or 15" Gooseneck
• Vertigo Angle Crank Lever, Spring & Bolt Complete Assembly
  

Does not include Fly Lead. 

Specifications

CF 24ft Pole - Collapsed 5.2ft / 1.6m, Weight 3.5 lbs / 1.6kg, Handle Diameter 1.5 inches / 38mm

CF 32ft Pole - Collapsed 5.2ft / 1.6m, Weight 5 lbs / 2.3kg, Handle Diameter 1.8 inches / 46mm

CF 45ft Pole - Collapsed 6.3ft / 1.9m, Weight 7 lbs / 3.2kg, Handle Diameter 2 inches / 50mm

CF 55ft Pole - Collapsed 7.3ft / 2.1m, Weight 10 lbs / 4.5kg, Handle Diameter 2.13 inches / 54mm

Endura Water Fed Pole: Unmatched Control and Durability

The Endura Water Fed Pole sets a new standard in professional window cleaning with its advanced anti-rotational technology and patented clamp designs. Engineered for superior control and efficiency, this innovative tool offers exceptional durability and ergonomic comfort, ensuring ease of use and extended longevity. The Endura’s cutting-edge clamp system enables quick adjustments and secure locking during operation, making it the ideal choice for professionals seeking a high-performance cleaning solution.

Revolutionary Anti-Rotational Design

In 2016, Ionic Systems began developing an anti-rotational water fed pole to address a common challenge faced by window cleaning professionals. Years of research and development led to the creation of a unique clamping system that minimizes tube wear over time while preventing unwanted rotation—even when components experience natural wear. The Endura Water Fed Pole is the culmination of this effort, delivering a robust, long-lasting tool built to withstand the demands of daily use. Even with the clamps open, the tube sections simply won’t spin!

Below is description of all the types of Endura poles available. 

• Grafter
• Swift
• Vertigo Standard
• Vertigo Quick Release
  

Choose type and size from the drop down menu. 

Videos

Disclaimer: This video is the property of its original creator or manufacturer and is provided here for informational purposes only. Clean Direct does not claim any rights to this content and is not responsible for its accuracy or representations.

Included

• One Endura pole in specified size
• 14" or 18" Dual Trim Brush Head Assembly
• Vertigo Angle Crank Lever, Spring & Bolt Complete Assembly

Does not include Fly Lead. 

Specifications

CF 24ft Pole - Collapsed 5.2ft / 1.6m, Weight 3.5 lbs / 1.6kg, Handle Diameter 1.5 inches / 38mm

CF 32ft Pole - Collapsed 5.2ft / 1.6m, Weight 5 lbs / 2.3kg, Handle Diameter 1.8 inches / 46mm

CF 45ft Pole - Collapsed 6.3ft / 1.9m, Weight 7 lbs / 3.2kg, Handle Diameter 2 inches / 50mm

CF 55ft Pole - Collapsed 7.3ft / 2.1m, Weight 10 lbs / 4.5kg, Handle Diameter 2.13 inches / 54mm

Ionic Systems Fly Lead to fit the Hydra Poles.

Please choose from the following sizes in the drop down menu:

• 23 Feet (7m) - Fits Hydra Poles from 17 Ft to 21 Ft
• 33 Feet (10m) - Fits Hydra Poles from 24 Ft to 30 Ft
• 52 Feet (16m) - Fits Hydra Poles from 32 Ft to 45 Ft
• 72 Feet (22m) - Fits Hydra Poles from 55 Ft to 65 Ft
• 85 Feet (26m) - Fits Hydra Poles for 80 Ft

Each fly lead comes with connectors on each end, one push fit style for the bottom of the water fed pole and one anti snag pole hose adapter for the water supply hose.

Foamion is the little brother to the Thermion™ system. Thermion™ is dual purpose, and is used for Weedkilling and Soft Washing, whereas Foamion™ is primarily a Soft Wash System.

Foamion™ is a cost effective add-on machine and it works in conjunction with your existing Ionic Reach & Wash® System. 

Foamion™ gives the operative the option to mix any chemical product, i.e. Sodium Hypochlorite and Biocides at the point of use. This is a perfect way to apply treatments for algae infestations on render or plastics. Foamion™ can used to treat moss on roof tiles or apply black spot remover for patios, paths or driveways.

*Battery Not Included*

Battery Specs: Needs 2 of 150Ah 12V Lead Acid batteries or 2 of 105Ah Lifos Lithium Iron Phosphate (LiFePO4) batteries.

Foam Cleaning

Applying treatments as a foam has multiple benefits, as it gives a longer contact dwell time on a surface. The air infused mix of chemical and water, promotes activation and allows the chemical to work to it’s optimum performance. Chemical activation is further amplified when mixed with hot pure water up to to 60°C from a Thermopure™ system.

A chemical mixed with air and heat is super charged and becomes even more powerful and vigorous, meaning a reduction in the amount of chemical used per application to achieve the desired result. When the chemical is applied as a foam it significantly reduces water usage and the risk of over-spray and run off. 

The Foamion™ system can be retro fitted and paired with many existing van installations. Foamion™ takes a pumped water feed from the existing Reach & Wash® system, which enters through a non-return valve, this eliminates the risk of any chemical contamination of the pure water system and delivery pumps, so window cleaning results are unaffected.

Having the Foamion™ operate in this way, allows a chemical feed and pure water to be applied at the same time, allowing operatives to soft wash and window clean simultaneously. The Foamion™ is a battery powered unit, so it can be used self-contained like a Reach & Wash® System. 

 Video

Disclaimer: These videos are the property of its original creator or manufacturer and is provided here for informational purposes only. Clean Direct does not claim any rights to this content and is not responsible for its accuracy or representations.

Specifications

Dimensions: 26 in x 48 in x 18 in

Weight: 176 lbs / 282 lbs depending on battery

Power: 12V

Air Pressure control: on-board isolated air regulator

Max run time: 8 hours

Mix Ratio Min: 19/1 (5%)

Mix Ratio Max: 3/1 (25%)

Cleaning Solution Capacity: 9 gal / 35 L

Frame Construction: Stainless Steel

Outer Construction: Polypropylene

Operating noise level at 1 meter: <85db

Operating noise level at 5 meter: <72db

Vehicle Clamping: FMVSS-208 crash tested clamps

Air compressor pressure:; 142 psi (max)

Compatibility: Compatible with all Reach & Wash Systems

Manuals

Foamion User Manual

Introducing the all-new portable version of the Foamion^TM

The Foamion^TM Portable is an excellent tool for a wide range of cleaning applications, including cleaning windows, vehicles, and building exteriors. Its ability to provide a controlled fusion of water, chemical, and air makes it a versatile and effective cleaning solution.

Here we've assembled the major components for the portable Foamion system including the main unit, cart and some hose accessories.

For the traditional van mounted Foamion, click for more details.

For the Spray Lance only, click for more details.

This assembly does not include the telescopic pole, it must be ordered separately.

Video

Disclaimer: This video is the property of its original creator or manufacturer and is provided here for informational purposes only. Clean Direct does not claim any rights to this content and is not responsible for its accuracy or representations.

Included Items

• Foamion Portable (FOAMION-P)
• Foamion Portable Trolley (FOAMION-P-T)
• Foamion Brush Adapter (FOAMIONBA)
• Foamion Hose - 52 ft or 16m RX (FOAMIONH1)
• Foamion Hose - 23 ft or 7m 1/2" (FOAMIONH2)
• Foamion Lance (FOAMIONL)

You will need to purchase a battery locally.

Other items you may need - Must be ordered separately:

• Ionic Hydra Pole System
• Stainless Steel Hose Reel (only)
• Hi-Vis Air & Water RPVC Hose (12.5MMHS2) 164ft
• Hose Connector (R0505)
• Stainless Hose Clips (19.8-706R) (R0861) (x4)

About the Lance:

Specifications

• Dimensions: H: 19" (490mm) x W: 24" (600mm) x D: 18" (470mm)
• Weight: 90lbs 6 oz (41kg (Lithium Battery)
• Power: 12v (Lithium Battery)
• Air Pressure Control: On-board Isolated Air Regulator
• Max Run Time: 4 Hours
• Mix Ratio Min: 19/1 (5%)
• Mix Ratio Max: 3/1 (25%)
• Frame Construction: Polypropylene
• Outer Construction: PolyPropylene
• Operating Noise Level @1mtr: <85db
• Operating Noise Level @5mtr: <72db
• Air Compressor Pressure: 142psi (max)
• Compatibility: Compatible with all Reach & Wash Systems and/or water taps

 Coverage

 Manuals

Foamion Portable User Manual

Please Note: This product listing is for the Grafter™️ style configuration for the new Hydra Waterfed poles.

*Each pole requires one fly lead, purchased separately. 

You'll need to choose pole length and pole construction (material). All Grafter poles come with a 12 inch non-curling monofilament nylon bristle brush and adjustable angle crank.

Below is a video and description of all the types of Hydra poles available. If you are interested in one of the other styles of poles then click the link below:

• Grafter
• Swift
• Vertigo Standard
• Vertigo Quick Release

Ionic Hydra™️ Waterfed Pole

Hydra is a lightweight but strong pole platform that window cleaners can configure based upon their specific needs. Therefore just like the mythical Greek serpent Ionic’s Hydra™️ pole is available with a number of head options.

Weight Savings

The first thing you notice about the Hydra™️ pole is just how light it is. Ionic has really focused on weight reduction and have reduced the wall thickness of every pole section, resulting in significant weight savings and maintained rigidity. Narrow handles provide a more comfortable grip. In order to achieve Ionic's lightest ever pole, every component came under scrutiny, with weight savings being made on nearly every part, from clamps to levers.

One Finger Operation Clamps

The second thing you notice are the next generation clamps on the Hydra™️ pole, with slick one finger operation and adjustment these clamps feature patent pending spring assisted release to reduce tube section wear. In addition, the clamps are carefully crafted to ensure tight closure time after time,  year after year.

Protector™️ Handle as Standard

The final thing you notice is that every Hydra™️ pole comes standard with Ionic’s unique Protector handle. The only waterfed pole to meet the British Standard for electrical safety is available to you at no extra cost. It seems that there is barely a month that goes by without news of a window cleaner electrocuted at work. Whilst safer than ladders Ionic believes that waterfed poles should be a no-risk alternative. 

Important: A Special Note About the Protector Handle

The bottom section of the pole is the only section that is double insulated, giving protection up to 1000 volts. If the operator uses it in proximity of a higher voltage, there is a risk of it jumping from the carbon sections and electrocuting the operator. It is absolutely essential that the operator or supervisor does a risk assessment prior to undertaking work using this pole. In areas of greater electrocution risk we recommend using a fully fiber glass pole up to 30ft.

Configurable Brush Heads

Hydra™️ is a lightweight but strong pole platform that window cleaners can configure based upon their specific needs. Therefore just like the mythical Greek serpent Ionic’s HydraTM pole is available with a number of head options.

Head Options

The Hydra™️ range adopted the tried and tested heads of Ionic's previous Grafter™️, Glyder™️, Swift ™️ and Vertigo™️ waterfed poles. This means you can select your preferred head and brush assembly, and benefit from the numerous features that are standard on the Hydra™️ pole range, including; light weights, compact sizes, next generation clamps, tubeless storage, protective handle and water-flow shut off.

*Hydra Grafter Pole only fits with the 12 inch grafter brush. If you want a larger sized brush, you will need a different pole. 

Neck Options

The Grafter™️ Head comes with the Residential Brush/Angle-Crank for Grafter™️ 

Features

Hydra™️ Features

TUBELESS QUICK CONNECTION

Push fit style connection allows for quick connection to and from the pole, saving you time and money. The twist and lock feature within the protective housing prevents accidental separation during use.

WATER FLOW SHUT OFF Allows the user the shut the water flow off by crimping the tube, meaning the pole can be left unsupervised with no water flowing, reducing unnecessary water usage and saving money.

SPRING LOADED CLAMPS

Combined with wear resistant telescopic tubes, Ionic’s patent pending spring assisted pole clamps ensures smooth action, whilst minimizing wear in the pole sections. While other designs insure that poles remain clamped as the section wears, our focus was to engineer out factors that contribute to pole tube wear in the first place. In doing so Ionic’s poles last considerably longer, retain their performance and save you money over time.

FlyLeads

Hydra FlyLeads

Hydra™️ is a tubeless pole, making it neat and tidy when storing in your van. The pole hose, known as a fly lead, is stored on your hose reel when not in use. Choosing the correct fly lead for your Hydra™️ is dependent on how it is going to be used. For example, if you have one 32ft Hydra™️ then you will require a 16 meter fly lead. But if you have multiple size poles then you only need to have a fly lead to fit your longest pole, so if you had a 32ft and a 55ft Hydra, a 22 meter fly lead would cover both poles.

*If you have more than one operator then a fly lead per hose reel will be required.

Size Chart

Please Note: This product listing is for the Swift™️ style configuration for the new Hydra Waterfed poles.

*Each pole requires one fly lead, purchased separately. 

You'll need to choose pole length, pole construction (material) and size brush. All Swift poles come standard with a 9" Gooseneck however 24" and 36" sizes are available by request (for an additional fee). Please contact us directly for pricing on larger sized Goosenecks. Brushes are commercial grade, ready to fit to an Ionic ferrule.

Below is a video and description of all the types of Hydra poles available. If you are interested in one of the other styles of poles then click the link below:

• Grafter
• Swift
• Vertigo Standard
• Vertigo Quick Release

Ionic Hydra™️ Waterfed Pole

Hydra is a lightweight but strong pole platform that window cleaners can configure based upon their specific needs. Therefore just like the mythical Greek serpent Ionic’s Hydra™️ pole is available with a number of head options.

Weight Savings

The first thing you notice about the Hydra™️ pole is just how light it is. Ionic has really focused on weight reduction and have reduced the wall thickness of every pole section, resulting in significant weight savings and maintained rigidity. Narrow handles provide a more comfortable grip. In order to achieve Ionic's lightest ever pole, every component came under scrutiny, with weight savings being made on nearly every part, from clamps to levers.

One Finger Operation Clamps

The second thing you notice are the next generation clamps on the Hydra™️ pole, with slick one finger operation and adjustment these clamps feature patent pending spring assisted release to reduce tube section wear. In addition, the clamps are carefully crafted to ensure tight closure time after time,  year after year.

Protector™️ Handle as Standard

The final thing you notice is that every Hydra™️ pole comes standard with Ionic’s unique Protector handle. The only waterfed pole to meet the British Standard for electrical safety is available to you at no extra cost. It seems that there is barely a month that goes by without news of a window cleaner electrocuted at work. Whilst safer than ladders Ionic believes that waterfed poles should be a no-risk alternative. 

Important: A Special Note About the Protector Handle

The bottom section of the pole is the only section that is double insulated, giving protection up to 1000 volts. If the operator uses it in proximity of a higher voltage, there is a risk of it jumping from the carbon sections and electrocuting the operator. It is absolutely essential that the operator or supervisor does a risk assessment prior to undertaking work using this pole. In areas of greater electrocution risk we recommend using a fully fiber glass pole up to 30ft.

Configurable Brush Heads

Hydra™️ is a lightweight but strong pole platform that window cleaners can configure based upon their specific needs. Therefore just like the mythical Greek serpent Ionic’s HydraTM pole is available with a number of head options.

Head Options

The Hydra™️ range adopted the tried and tested heads of Ionic's previous Grafter™️, Glyder™️, Swift ™️ and Vertigo™️ waterfed poles. This means you can select your preferred head and brush assembly, and benefit from the numerous features that are standard on the Hydra™️ pole range, including; light weights, compact sizes, next generation clamps, tubeless storage, protective handle and water-flow shut off.

The Swift™️ Head comes with your choice ofSwift Brush Complete Commercial Brush/Gooseneck For Swift™️ head, choose from 14 inch or 18 inch brush, with gooseneck in 9 inch, 18 inch and 24 inch sizes.

Features

Hydra™️ Features

TUBELESS QUICK CONNECTION

Push fit style connection allows for quick connection to and from the pole, saving you time and money. The twist and lock feature within the protective housing prevents accidental separation during use.

WATER FLOW SHUT OFF Allows the user the shut the water flow off by crimping the tube, meaning the pole can be left unsupervised with no water flowing, reducing unnecessary water usage and saving money.

SPRING LOADED CLAMPS

Combined with wear resistant telescopic tubes, Ionic’s patent pending spring assisted pole clamps ensures smooth action, whilst minimizing wear in the pole sections. While other designs insure that poles remain clamped as the section wears, our focus was to engineer out factors that contribute to pole tube wear in the first place. In doing so Ionic’s poles last considerably longer, retain their performance and save you money over time.

FlyLeads

Hydra FlyLeads

Hydra™️ is a tubeless pole, making it neat and tidy when storing in your van. The pole hose, known as a fly lead, is stored on your hose reel when not in use. Choosing the correct fly lead for your Hydra™️ is dependent on how it is going to be used. For example, if you have one 32ft Hydra™️ then you will require a 16 meter fly lead. But if you have multiple size poles then you only need to have a fly lead to fit your longest pole, so if you had a 32ft and a 55ft Hydra, a 22 meter fly lead would cover both poles. *If you have more than one operator then a fly lead per hose reel will be required.

Size Chart

Please Note: This product listing is for the Vertigo™️ Quick Release style configuration for the new Hydra Waterfed poles.

*Each pole requires one fly lead, purchased separately. 

Vertigo Quick Release allows the operator to easily remove the Brush Head and replace it with the Vertigo Moerman Tool Adapter; therefore, enabling a range of Moerman hand tools to be used. Examples are a window mop, a squeegee, or a scraper, among others.

You'll need to choose pole length, pole construction (material) and size brush. All Vertigo™️ Quick Release poles come standard with a Vertigo Neck in one of three sizes (6 inch, 9 inch or 15 inch). Don't worry, we've pre-matched these necks to the length of the pole you choose.  The water flows through the angle crank, preventing any exposed tubing outside the pole.

Brushes are commercial grade and available in 14 in. and 18 in. sizes with Rinse Bar with Pencil Jets as standard.

There are three small options available not listed in the drop-down menu. You can optionally substitute Fan Jets (instead of Pencil Jets). Also you can choose a Flocked Brush if you intend on cleaning cladding or delicate surface cleaning. Lastly you can choose a Lightweight Brush (less bristles to lighten overall head weight).

Please contact us for a custom quote if you intend on substituting for a Fan Jet, Flocked Brush or Lightweight Brush.  If you want to own the standard style AND add other brush versions they are listed on our website separately and can be easily added to your cart before checkout.

Below is a video and description of all the types of Hydra poles available. If you are interested in one of the other styles of poles then click the link below:

• Grafter
• Swift
• Vertigo Standard
• Vertigo Quick Release

Ionic Hydra™️ Waterfed Pole

Hydra is a lightweight but strong pole platform that window cleaners can configure based upon their specific needs. Therefore just like the mythical Greek serpent Ionic’s Hydra™️ pole is available with a number of head options.

Weight Savings

The first thing you notice about the Hydra™️ pole is just how light it is. Ionic has really focused on weight reduction and have reduced the wall thickness of every pole section, resulting in significant weight savings and maintained rigidity. Narrow handles provide a more comfortable grip. In order to achieve Ionic's lightest ever pole, every component came under scrutiny, with weight savings being made on nearly every part, from clamps to levers.

One Finger Operation Clamps

The second thing you notice are the next generation clamps on the Hydra™️ pole, with slick one finger operation and adjustment these clamps feature patent pending spring assisted release to reduce tube section wear. In addition, the clamps are carefully crafted to ensure tight closure time after time,  year after year.

Protector™️ Handle as Standard

The final thing you notice is that every Hydra™️ pole comes standard with Ionic’s unique Protector handle. The only waterfed pole to meet the British Standard for electrical safety is available to you at no extra cost. It seems that there is barely a month that goes by without news of a window cleaner electrocuted at work. Whilst safer than ladders Ionic believes that waterfed poles should be a no-risk alternative. 

Important: A Special Note About the Protector Handle

The bottom section of the pole is the only section that is double insulated, giving protection up to 1000 volts. If the operator uses it in proximity of a higher voltage, there is a risk of it jumping from the carbon sections and electrocuting the operator. It is absolutely essential that the operator or supervisor does a risk assessment prior to undertaking work using this pole. In areas of greater electrocution risk we recommend using a fully fiber glass pole up to 30ft.

Configurable Brush Heads

Hydra™️ is a lightweight but strong pole platform that window cleaners can configure based upon their specific needs. Therefore just like the mythical Greek serpent Ionic’s HydraTM pole is available with a number of head options.

Head Options

The Hydra™️ range adopted the tried and tested heads of Ionic's previous Grafter™️, Glyder™️, Swift ™️ and Vertigo™️ waterfed poles. This means you can select your preferred head and brush assembly, and benefit from the numerous features that are standard on the Hydra™️ pole range, including; light weights, compact sizes, next generation clamps, tubeless storage, protective handle and water-flow shut off.

The Vertigo™️ Quick Release system includes a quick release brush variationsIonic Systems Vertigo Quick Release Brush Head Assembly of double trim, light weight, or flocked, sizes 14"or 18", with necks of of 6", 9", or 15".

Features 

Hydra™️ Features

TUBELESS QUICK CONNECTION

Push fit style connection allows for quick connection to and from the pole, saving you time and money. The twist and lock feature within the protective housing prevents accidental separation during use.

WATER FLOW SHUT OFF Allows the user the shut the water flow off by crimping the tube, meaning the pole can be left unsupervised with no water flowing, reducing unnecessary water usage and saving money.

SPRING LOADED CLAMPS

Combined with wear resistant telescopic tubes, Ionic’s patent pending spring assisted pole clamps ensures smooth action, whilst minimizing wear in the pole sections. While other designs insure that poles remain clamped as the section wears, our focus was to engineer out factors that contribute to pole tube wear in the first place. In doing so Ionic’s poles last considerably longer, retain their performance and save you money over time.

MULTIPURPOSE TOOL

When you opt for the Vertigo™️ quick release head, you have the ability to transform your Hydra™️ into a multi purpose tool. With the Moerman adapter you can fit a range of Moerman hand tools to the Vertigo™️ Q/R head, including squeegees, t-bars, scrapers etc. The Vertigo™️ quick release spray nozzle is perfect for rinsing, and allows the application of a foam cleaner when combined with Ionic’s Constant Flow™️ automatic pump system.

FlyLeads

Hydra FlyLeads

Hydra™️ is a tubeless pole, making it neat and tidy when storing in your van. The pole hose, known as a fly lead, is stored on your hose reel when not in use. Choosing the correct fly lead for your Hydra™️ is dependent on how it is going to be used. For example, if you have one 32ft Hydra™️ then you will require a 16 meter fly lead. But if you have multiple size poles then you only need to have a fly lead to fit your longest pole, so if you had a 32ft and a 55ft Hydra, a 22 meter fly lead would cover both poles. *If you have more than one operator then a fly lead per hose reel will be required.

Size Chart