Products

Reach new heights safely with the SkyVac® SkyScraper® 30ft Telescopic Pole, designed for high-level moss removal from the safety of the ground or platform. Weighing just 2kg, this lightweight carbon fiber hybrid pole offers exceptional strength and control, minimizing fatigue during extended use.

Compatible with the SkyScraper® Head & Blade system, Wire Roof Brush, and Speedi Brushes, it delivers a complete, efficient solution for roof cleaning. Simply attach your chosen head, extend the pole to the desired height, and lock it in place with secure clamps.

When finished, the pole collapses compactly for easy transport and storage. Ideal for professionals seeking a safe, durable, and efficient ladder-free cleaning solution.

Disclaimer:

Clean Direct / SkyVac® high-reach poles are not designed or certified for use in combustible dust environments. Use of this equipment in such conditions may result in serious injury, property damage, or other hazards.

Please note that carbon fiber poles are electrically conductive. Operators should exercise extreme caution when using this product around any electrical source, including overhead power lines, outlets, equipment, or during outdoor use in storms or wet conditions.

The operator assumes all risks associated with using this product outside its intended purpose and operating guidelines.

Specs

Telescopic Pole 30ft:

• Height: 30ft
• Collapsed Height: 5.8ft
• Weight: 2kg
• Material: Carbon Fibre Hybrid

The SkyVac® Soap Dispenser is used to transfer detergent or soapy water directly through your water fed pole directly to facias, soffits and windows.

Compact and lightweight, simply twist the switch on the dispenser to allow your preferred choice of cleaning detergent to feed through your water fed pole for thorough cleaning of soiled surfaces. See instructions below for how to connect.

*Multi Purpose Detergent not included

Features:

• Easy to connect and refill
• Adjustable control

How to connect:

• Fill the soap dispenser with detergent (sold separately)
• Attach the end of the hose reel to the Soap dispenser (on/off switch side)
• Connect your fly lead from your water fed pole to the opposite end of the soap dispenser
• Twist the switch on the dispenser to 'soap' to allow detergent or soapy water to feed through to your water fed pole

Video

Included Items

1 x Soap Dispenser

SkyVac® Spacer Nut for Interceptor Belt Cover

Four individual parts

If you prefer to use our standard blue, silicone, flexi tools on the end of your new SkyVac® Elite Poles for gutter cleaning then you can use this adapter.

It can be used with the SkyVac® 135º Tapered Blue Flexi Tool Holder or the 180º Blue Flexi Tool Holder.

Sometimes operators prefer to use this tool because it is bendable at the end which helps to easily remove clogs or troublesome debris by flexing it in-and-out.

We also have several styles of Rigid Carbon Fiber Tool Holders that are compatible with the Elite Poles for Gutter Cleaning.

Maximize the performance of your high-reach vacuum with the SkyVac Swivel Cuff. This professional hose-to-pole connector delivers smooth 360° rotation to stop kinks and tangles, maintain uninterrupted airflow, and keep you cleaning efficiently—especially at height. Built for tough, daily use, it offers quick, reliable coupling between your vacuum hose and poles.

Applications

• Commercial & residential gutter cleaning

• High-level vacuuming in hard-to-reach areas

• Professional exterior and interior cleaning

Key Features

• 360° swivel action: Prevents hose twists and snags for smoother workflow

• Seamless operation: Consistent suction and faster job completion

• Durable build: Engineered for demanding, professional use

Sizes & Compatibility

• 50–44mm Swivel Cuff: Compatible with SkyVac Elevate Interior Dusting Poles

• 50–50mm Swivel Cuff: Compatible with SkyVac Elite and Hybrid Gutter Cleaning Poles
  

Upgrade your setup with the SkyVac Swivel Cuff for tangle-free operation and consistently powerful, high-reach cleaning.

Control suction power with a twist of this Vac Release Conversion Cuff, the perfect add-on for your push-fit poles. This Innovative tool removes the need to lower the poles or cut the power when releasing gutter debris, allowing the user to work more safely and efficiently.

• Positive Stop 

• Compatible with the Push Fit Poles only. 

• Twist to tighten it on the end of the Push-Fit Pole 

Another World First for skyVac®! Control suction with a simple twist of the cuff on the Vac Release Pole. Compatible with the SkyVac® Industrial and Interceptor Gutter Vacuums, this innovative and ultra-lightweight carbon fiber pole enables the operator to safely and efficiently release gutter debris without having to lower poles or cut vacuum power.

SkyVac® Elite Vac Release Pole. Patent PENDING: Application No: GB1713830.6

The SkyVac® Elite Poles alone have the lightest weight to size ratio on the gutter cleaning market. With the added feature of the Vac Release, your poles will be performing at their best.

The Vac Release function saves you time and results in massive productivity gains. Traditionally, to remove larger debris and tufts, the operator would deactivate the machine while balancing or lowering their poles to manually pull the tuft out. The Vac Release Pole eliminates the time wasted doing it manually.

It features a simply twist door function, positive stop, and adjustable clamp mechanism.

Key Features:

• Extremely strong but lightweight carbon fiber construction
• Twist door function
• Positive stop and adjustable clamp mechanism
• Compatible with the Elite Pole System only

Video

“Disclaimer: This video is the property of its original creator or manufacturer and is provided here for informational purposes only. Clean Direct does not claim any rights to this content and is not responsible for its accuracy or representations.”

Included Items

One SkyVac® Release Elite Pole

Specifications

• Length: 5 ft long (1.5m)
• Diameter: 2in Diameter (50mm)
• Material: Carbon Fiber

The SkyVac® 27, 30, 78, 150, Sonic Atom, 85, and Interceptor have a very durable wet/dry  filter located under the head. These are easily removed by the twist of a knob. 

Interceptor, 85, Sonic Atom, & 78 systems use the same filter. They are very durable and last quite a long time if properly cleaned after each days use.

To clean the filters simply wash them out with a water hose and/or blow them out with an air hose.

If you are needing a more stringent filter for sensitive internal high dusting areas we offer a HEPA rated filter. We do not recommend this style for gutter cleaning.

Definition of HEPA from Wikipedia:

High-efficiency particulate arrestance (HEPA),^[1][2] also sometimes called high-efficiency particulate arresting or high-efficiency particulate air, is a type of air filter. Filters meeting the HEPA standard have many applications, including use in medical facilities, automobiles, aircraft and homes. The filter must satisfy certain standards of efficiency such as those set by the United States Department of Energy (DOE). To qualify as HEPA by US government standards, an air filter must remove (from the air that passes through) 99.97% of particles that have a size of 0.3 µm.^[3]

Filter Maintenance: 

We recommend cleaning at the end of each project and replacing every four months.  Inspect your filter regularly for wear and tear, making sure to replace damaged filters immediately. 

The filter traps any dust and airborne particles to prevent them from getting into the motor.  Over time the filter can become clogged which will restrict the air flow getting into the system.  A dirty filter can lead to a loss of power so make sure you keep clean.  

Top Tip:

• Use a stiff brush to remove dry dirt.
• If very dirty, then rinse under the hose.
• Always start each project with a CLEAN & DRY filter.
• Have a spare 

Video

Disclaimer: This video is the property of its original creator or manufacturer and is provided here for informational purposes only. Clean Direct does not claim any rights to this content and is not responsible for its accuracy or representations.

 Specifications

Filter for Interceptor, 85, Sonic Atom, & 78:

Height: 6 1/2 inches

Outside Diameter: 6 3/4 inches

Inside Diameter: 5 3/4 inches

Thickness: 1/2 inch

Weight: 10 oz

Filter for 150 / 30/ 27

Height: 5 inches

Outside Diameter: 6 3/4 inches

Inside Diameter: 5 3/4 inches

Thickness: 1/2 inch

Weight: 8 oz

*Measurements are approx*

SkyVac® Elite Viper tool offers two extended forks to allow more thorough gutter clear outs. This tool can help tear through the turf and scrape away the more stubborn debris. The two forks allow you to dig deep and tackle those areas that might not be as accessible with a standard end tool. This tool is ideal for those tougher jobs that require a helping hand, or should we say claw?

Compatible with the SkyVac® Elite Tool Holders.

Please Note: Hairpin Rigid Neck Tool Holder not included.

Included Items

1 x Viper End Tool

Specifications

• 16 in (410mm) Long (From end tool base to longest claw)
• 11.5in (295mm) Long (From end tool base to suction entry point)
• 1.7in (4mm) Diameter 
• Material: Aluminum
• Long claw 4.5 inches (From tip of end tool)
• Short claw 4 inches (From tip of end tool)
• Compatible with Elite Tool Holders 

Hardworking & Hardwearing - it's lighter, sturdier and less prone to kinks than previous styles.

The robust, yet lightweight build of the 2" (50-51mm) wire reinforced suction hose is an ideal companion for your SkyVac® gutter vacuum. Engineered to withstand the rigors of gutter cleaning, the wire framework creates a smoother passageway for debris, to minimize blockages, improve air circulation and deliver faster results.

Available in 24 ft for the 2" (50mm) Vacuum Port found on the SkyVac®️ Mighty Atom Clamped Version, Sonic Atom, Industrial 85 & Interceptor.

Note: This is for the HOSE ONLY

If you need a Hose to Drum Cuff go here.

If you need a Hose to Pole Cuff go here.

If you need to connect two hoses together to create a longer hose run then see our Hose-to-Hose Connector for SkyVac® Mighty Atom, Sonic Atom, SkyVac 85, and Interceptor.

Video

Wire Reinforced Hose Preview from Spinaclean on Vimeo.

Disclaimer: This video is the property of its original creator or manufacturer and is provided here for informational purposes only. Clean Direct does not claim any rights to this content and is not responsible for its accuracy or representations.

Included Items

1 x Wire Reinforced Hose approximately 24 ft

This is for the HOSE ONLY.

If you need a Hose to Drum Cuff go here.

If you need a Hose to Pole Cuff go here.

If you need a Hose-to-Hose Connector go here. 

Specifications

• Length:  24 ft (7.5m) 
• Diameter: 50-51mm
• Weight: 3.5oz (400g) per 3ft 4in (1m)
• 24 ft = 5lb 8oz

Not suitable: for the 1.5in (38mm) Vacuum Port found on the traditional, push fit pole version of the SkyVac®️ Atom, Internal 78, Internal 27, & Internal 30

Suitable: for the 2" (50mm) Vacuum Port found on the SkyVac®️ Mighty Atom Clamped Version, Sonic Atom, Commercial,  Industrial 85,  & Interceptor

The 24 Ft Telescopic Pressure Washing Lance is designed for high level cleaning safely from the ground - no need for ladders or high access equipment. Simply attach it to a pressure washer (available separately) and clean up to three stories high (24ft).

There is no need for ladders or high access equipment with this telescopic lance, simply attach to your existing pressure washer to clean up to three stories high (24ft).

This lance comes complete with a full set of 5 Variable Nozzles for customizing your water pattern and cleaning. This lance is great for high level cleaning on areas such as gutters, fascias, soffits, UPVA, cladding, and more.

Key Features:

• High level cleaning from the safety of the ground
• Complete with 5 variable nozzles for customizable cleaning
• Connect to your pressure washer for powerful high reach cleaning
• It comes complete with a full set of 5 variable, interchangeable nozzles and safety belt.

Included Items

1 x 24ft Telescopic Lance

Specifications

• Inlet: 3/8" QC Plug
• Outlet: 1⁄4" QC Coupler
• Maximum Pressure: 4000 psi (275 bar)
• Maximum Delivery Rate: 8 gpm (30 lpm)
• Maximum Temperature: 212° F (100°C)
• Package Dimensions: 86in x 10in x 5in
• Weight: 20lbs (9kg)

One of three molded casings that are used to construct the 2 motor 78 vac head. This is the top casing. The replacement handle sits on top and is sold separately.

Includes SkyVac®️ 85 Vacuum, drum & chassis. No poles or attachments are included with this purchase. If you are wanting to order a full SkyVac®️ 85 Elite System then click here.

Includes:

• 3 Motor Vacuum Head (240v, 30 amps)
• Cartridge Filter
• Vacuum Cart
• Vacuum Drum

Note: For SkyVac 85 owners who want to handle high dusting, Clean Direct offers an internal conversion option that transforms the Industrial 85 into a high-level indoor cleaning setup. The conversion kit uses an internal drum that accommodates dust bags and can be paired with internal cleaning tools for easier access to overhead dust. Customers should note that the 3-motor 85 platform requires a 220 to 240V power source and uses a North American L14-30 4-prong twist-lock plug. If that facility power is not available, Clean Direct also offers dedicated 110/120V, 20A high-dusting alternatives, including a 2-motor system better suited to standard commercial power.

Front Inlet to SkyVac®️ 85 or SkyVac Interceptor