Products

Take your existing vacuum to new heights with the NEW SkyVac®️ Elevate 1 3/4" (44mm) Clamped Poles.

For out-of-reach high dusting projects up to 40ft, the Elevate Poles are the perfect upgrade to your push-fit poles. The clamped feature allows for greater control, stability, and faster working!

Transform your existing vacuum into a high-level cleaning solution with the NEW Elevate Clamped Poles!

Ideal for cleaning everything from air conditioning ducts, beams and other out-of-reach locations.

These ultralight poles are made from a carbon fiber hybrid, weighing just 330g per pole! This package builds up to your required height in seconds, meaning a quick and easy set-up at the start of every project.

Compatible with the skyVac Internal 27 / Internal 30 / Internal 78 / Internal 150, this pole and accessory package includes accessories for most internal cleaning tasks! The angled tool holders (65 and 155 degrees) allow you to clean at difficult angles, and the brushes can tackle a wide range of internal cleaning tasks for an effective and efficient clean.

Key Features:

• THE PERFECT UPGRADE: These Elevate Poles are the perfect upgrade to your push-fit poles. 
• FOR GREATER CONTROL: Our poles allow greater control and stability - for faster working!
• ACCESS PROJECTS UP TO 40FT: Reach out-of-reach projects up to 40ft - all from the safety of the ground. 
• Secure Clamping Mechanism- top clamps lock rigid poles in place
• Strong and lightweight carbon fiber suction poles
• A range of accessories to meet most cleaning needs
• Reach up to 40ft for internal high level cleaning

Disclaimer:

Clean Direct / SkyVac® high-reach poles are not designed or certified for use in combustible dust environments. Use of this equipment in such conditions may result in serious injury, property damage, or other hazards. Please note that carbon fiber poles are electrically conductive. Operators should exercise extreme caution when using this product around any electrical source, including overhead power lines, outlets, equipment, or during outdoor use in storms or wet conditions.

The operator assumes all risks associated with using this product outside its intended purpose and operating guidelines.

Video

Disclaimer: This video is the property of its original creator or manufacturer and is provided here for informational purposes only. Clean Direct does not claim any rights to this content and is not responsible for its accuracy or representations.

Included 

Full set comes with the following:

• 1 x Soft Round Brush
• 1 x Large White Straight Brush
• 1 x Radiator Brush
• 1 x Small Half Round Vac Brush
• 1 x Small Flexi Brush
• 1 x Hose Cuff
• 1 x SkyVac Branded Carry Bag for Poles and Accessories

OR One individual elevate pole with no other items.

Specs

Individual pole

• Length: 5ft (1.5m)
• Diameter: 1.73" (44mm)
• Weight: 11.6oz (330g)
• Material: Hybrid Carbon Fiber

SkyVac® Industrial 85 Drum Upgrade Kit with Drain Hose & Sieve Basket

Separating gutter debris into solid & liquid matter, makes disposal quicker, easier, and smarter.

NEW drum with drain hose and removable sieve basket is the ideal upgrade for the SkyVac Industrial 85, dividing gutter debris as it enters the drum. The sieve basket catches the solid gutter debris, allowing the water to drain through into the base of the drum. Ideal for waterlogged projects!

Simply swap your existing Industrial 85 drum with the NEW upgraded kit and you are good to go.

Features & Benefits

Instead of a gutter soup, the sieve basket captures the solid gutter debris as it enters the vacuum, allowing the liquid to drain through into the base of the drum. The separated debris is easier and more convenient to dispose of. Liquid can be emptied via the drain hose directly into the drains, while the leaves and debris, captured in the sieve basket, can be tipped directly into a compost bin.

This is ideal for waterlogged projects, where clogged gutters have a build-up of standing water and saturated debris. Water can be quickly and easily emptied from the drum using the drain hose, a quick 2-minute job.

The Industrial 85 has a 16 gallon debris capacity when fully filled and could easily weigh up to 130 lbs. So, while the system has been designed to easily accommodate, maneuver, and safely tip out this weight of debris, being able to quickly and easily remove the liquid will really lighten the load.

Key Features

• Industrial 85 drum with drain hose, compatible with existing SkyVac Industrial 85 models.
• Drum has reinforced cyclonic side entry and a 16 gallon debris capacity.
• Drain hose with clips, mounted on the front of the drum for ease of access.
• Slightly raised drainage point and internal filter to reduce blockages caused by fine silt or sediment.
• Drain hose features an attached air tight cap.
• Removable sieve basket can be easily lifted in and out of the drum using the side handles and the contents tipped into a compostable bin.
• Separated gutter debris is much easier and faster to dispose of.

Please note: This listing is for the Industrial 85 Upgrade kit. Drum with drain hose and sieve basket only. Complete skyVac Industrial 85 system shown for demonstration purposes only.

Introducing the SkyVac® Elite Carbon Fiber Vacuum Poles designed for gutter cleaning. They can be used with the SkyVac® Interceptor and SkyVac® 85 Elite  clamped style systems. 

• Elite carbon fiber poles 5 ft long (1.5 metres) -  2" diameter (50mm diameter)
• Safe: Poles are joined together using a parallel joint and quick release clamp
• Efficient: Clamp mechanism is fully adjustable and super quick to release

These new and improved poles can be ordered as a set of 8, 6, or 4 or individually.

If you are looking for a more complete set with additional tool holders, half pole &  hose then click here.

Included items

• 1 Elite Carbon Fiber Vac Release Pole
• 7/5/3 Elite Carbon Fiber Poles
  
• Carry Bag
• Carbon Fiber Hairpin Rigid Neck Tool Holder
• Dual Tool (Standard dirt breaker + Scalloped tool) (12")
• Aluminum Long End Tool
• Aluminum Reducer Tool
• Plastic Crevice Tool
• Plastic Daily End Tool

OR One individual elite pole with no other items.

Specifications

• Length: 5ft (1.5m) per pole
• Diameter: 2" (50mm) per pole
• Weight: 10oz (280g) per pole
• Material: Carbon Fiber

Introducing SkyVac's newest Elite Carbon Fiber Vacuum Pole Bundle designed for professional gutter cleaning. The ultimate high reach suction pole system just got better!

Feather weight, at just under 10 oz per 5 ft pole, the poles are made of high-grade carbon fiber and have an all-in-one clamp system that secures each section. The reach is up to 40 feet high where the operator can clean from the safety of the ground.

These poles are designed to be used with the SkyVac 85 Elite and SkyVac Interceptor. 

The Vac Release Pole (used at the base) has a patent pending release cuff that makes suction control a breeze. The 3 angled carbon fiber tool holders and end tools are perfect for accessing all types of gutters. The kit now includes the wire reinforced suction hose.

This kit can be ordered in 4, 6 & 8 Pole Sets + a 1/2 Sized Pole. Full length poles are 5 feet. Poles can also be ordered individually.

ULTRA LIGHTWEIGHT & DURABLE:
Engineered and extensively field-tested, these poles are lightweight, stiff and easy to maneuver. Minimal weight coupled with greater control makes gutter clearing faster and less tiring.

CUSTOMIZABLE HIGH ACCESS UP TO 40FT:
5 ft & 2.5 ft pole lengths can be securely clamped together to achieve the perfect working height, whether working directly overhead or to reach over obstacles such as conservatories. With 135º Hairpin, 90º and 180º degree neck tools available, no angle is beyond reach.

COMPLETE SUCTION CONTROL:
Operate the vacuum directly from the base of the pole with the patent pending Vac release cuff. Simply twist the cuff to cut the suction.

VERSATILE HIGH REACH SYSTEM:
A multi-function high reach cleaning system, thanks to the secure locking mechanism, SkyVac® Elite Poles can also be used for roof, windows, soffits and fascia cleaning, unlike standard push, fit poles*. Why not offer roof cleaning as part of your exterior cleaning services by adding the skyScraper.

*For Roof, Windows, soffits and fascia cleaning you will need the Elite multi-connector (sold separately).

SkyVac® Elite Poles & Vac Release Cuff:

• Interconnecting poles slot securely together with a ‘positive stop’ on the base on the pole and clamping mechanism at the top.
• Tailor your working height with a choice of 1.5m and 0.75m poles.
• 10 oz per 5 ft – Ultra-durable high-grade carbon fiber construction.
• The patent-pending Vac Release pole enables the operator to control suction from the base of the pole.
• SkyVac® Elite Poles Patent PENDING: Application No: GB1713830.6

NEW SkyVac® Elite Angled Neck Tool Holders:

• NEW Elite Hairpin 135º Neck tool holder allows debris more space to travel through the bend, to reduce risk of blockages.
• NEW 180º Tool Holder is ideal for directly overhead projects with narrow access, or deep gutters.
• NEW 90º Tool Holder is ideal for hard-to-reach valley gutters.
• Engineered from lightweight and durable carbon fiber, the rigid neck construction gives the operator greater purchase and control over stubborn and deep-rooted gutter growths allowing them to be coaxed or wrestled out of downpipes.

SkyVac® Wire Reinforced Suction Hose:

• 24 feet of wire reinforced suction hose
• Sturdy, lightweight, maneuverable, and less inclined to kink due to the internal wire framework.
• 2 x 50mm Cuffs (1 x Vac to hose / 1 x Hose to pole).

SkyVac® Elite End Tools:

• Crevice end tool for accessing gutters in tight gaps.
• Dual tool for reducing gutter debris into smaller pieces for removal.
• Aluminum Tapered end tool for accessing small gaps.
• Daily end tool for general gutter clearing.
• Aluminum Long end tool for greater reach for hard to access gutters and downpipes
  

SkyVac® Branded Carry Case:

• For convenient storage and transport of your SkyVac® Elite pole system

Disclaimer:

Clean Direct / SkyVac® high-reach poles are not designed or certified for use in combustible dust environments. Use of this equipment in such conditions may result in serious injury, property damage, or other hazards.

Please note that carbon fiber poles are electrically conductive. Operators should exercise extreme caution when using this product around any electrical source, including overhead power lines, outlets, equipment, or during outdoor use in storms or wet conditions.

The operator assumes all risks associated with using this product outside its intended purpose and operating guidelines.

Included Items

Full set comes with the following:

• 1 Elite Carbon Fiber Vac Release Pole
• 1 Half Pole
• Additional 3, 5 or 7 Elite Poles depending on your selection
• SkyVac® Branded Carry Bag
• New 135º Carbon Fiber Hairpin Rigid Neck Tool Holder
• New 180º Carbon Fiber Tool Holder
• New 90º Carbon Fiber Tool Holder
• Dual Tool
• Long End Tool
• Crevice Tool
• Plastic End Tool
• Wire reinforced Hose
• 1 Drum/Vac Port Cuff (50mm)
• 1 Hose to Pole Cuff (50mm)

OR One individual elite pole with no other items.

Specifications

• Length: 5ft (1.5m)
• Diameter: 2" (50mm)
• Weight: 10oz (280g)
• Material: Carbon Fiber

The SkyVac® Dual End Tool is a 2-in-1 gutter cleaning end tool which gives you a standard end tool and a specialist end tool all in one! This multi-purpose tool is a no brainer, why carry multiple tools when you can have one tool that does it all? 

Time is money when you are on the job. Spend less time rummaging through your equipment and use one tool that serves multiple purposes, allowing you to be more productive and get the job done quicker!

Use the standard dirt breaker to make your way through gutters daily, the slanted end is ideal for breaking down tough gutter growths into smaller chunks; however, for the jobs that require a bit more of a fight, the scalloped end tool is going to be your best friend. Utilize the curved sides to slice and chop through the more dense or frozen turf as well as benefiting from the improved air flow thanks to the unique design which allows air to enter from both sides.

1) The standard dirt breaker will serve your everyday gutter cleaning needs, the slanted aluminum end efficiently breaks through dirt and turf making for an easy removal. 

2) The scalloped aluminum end tool helps tackle the more stubborn turf. The shaped edges and narrow tip allow better suction power to circulate around the gutter and allows debris to be removed more swiftly and stops the tool end from sticking to the base of the gutter. But that’s not all! The shaped edges allow you to slice through tougher gutter debris and breakthrough down pipe blockages. 

Video

Included Items

1 x Elite Dual End Tool

Specifications

• 11.5 inches Long (297mm)
• 1.7 inches Diameter (44mm)
• Material: Aluminum
• Compatible with Elite tool holders

Unique SkyVac

Innovation

For faster gutter cleaning results, reducing time consuming blockages.

The unique shape of the Elite Hairpin neck tool holder features a wider passageway, allowing debris to move more easily through the 135-degree bend. This broader profile is ideal for projects with stubborn, compact gutter turf which can become lodged in narrow bends.

With the Elite Hairpin Rigid Neck Tool holder, blockages are minimized. The curved shape and wider passageway of the neck section creates more space for debris and air to circulate, for smooth movement through the 135-degree angle. This reduces the bottlenecks and blockages that can be caused by twigs and stubborn gutter clumps and turf.

Compatible with the SkyVac® Elite Pole System, simply clamp the neck into the Elite pole and secure the chosen end tool with the clamp, and you are good to go.

For really stubborn, deep-rooted projects, we recommend using with the Elite scalloped end tool.

Key Features:

• Wider angle reduces blockages and improves air circulation for faster results
• Increased air speed by up to 3%
• Secure clamp keeps the end tool securely in place.
• Made from lightweight and durable carbon fiber materials
• Compatible with the SkyVac® Elite Gutter Cleaning poles and end tools. (for SkyVac® Industrial and Interceptor gutter cleaning machines)

Included Items

1 x SkyVac®️ Elite Hairpin Neck Tool Holder

(Elite pole and end tools sold separately)

Specifications:

Compatible with the Elite Carbon fiber Poles and Elite End tools (sold separately)

Approximately: 12" x 9" x 2"

A new approach to one of our classic end tools!

Tight gutters proving tricky?  Roof tiles hanging over guttering can make them tough to access.  

Our brand-new Elite Half Moon Crevice End Tool is designed to fit into narrow gaps, and thanks to its scalloped end it has a larger vacuuming surface area, making it a breeze to lift debris in even the most cramped spaces.

Please note: any poles in product images are for illustrative purposes and are sold separately. 

Key features: 

• Scalloped crevice end for a larger cleaning surface area – ensuring faster cleaning 
• Narrow enough to slot in between overhanging roof tiles and gutters 

Specifications:

• Material: Plastic / aluminum
• Dimensions (L x W x H): 16 x 3 x 1 in  / 41 x 7.8 x 2.2 cm
• Weight: .5 lbs / 222g
• Compatibility: skyVac Elite Suction Poles

Great for Pine Needles and Moss Crumbs! Pine needles often knit together and forming challenging clumps. This tool's wide funnel helps to channel the pine needles into the suction pipe and out of the gutters.

Please Note: The Elite Pole and Rigid Neck Tool Holder shown in the images is for illustration purposes only and is not included with this item.

Key Features:

• Fits neatly into the SkyVac® Elite Anti-block hairpin neck tool holder
• Helps air circulate more effectively around lighter gutter debris

Video

Included Items

1 x SkyVac® Hif-Flow End Tool

Specifications

• Length: Approximately 11in (270mm)
• Diameter at opening end: Approximately: 4.75in x 3in (120mm x 75mm)
• Weight: Approximately 4 oz (110 grams)

Essential set of attachments for high level internal cleaning, compatible with the SkyVac® Elite Pole System.

These end tools are all compatible with the skyVac® Elite Pole System through the use of the connector / adaptor tube, converting your poles into a high level internal cleaning system.

Each end tool is essential for a range of daily high reach vacuuming tasks, such as radiator dusting, flat surface dusting, pipe and duct cleaning, and a number of other dusting and vacuuming tasks.

This kit comes complete with two carbon fiber tool holders for customizing the angle at which you are cleaning, offering an easier and more thorough clean.

The Soft Round Brush is perfect for many daily tasks, and can easily clean those smaller spaces. The Pivot Black Large Brush is for cleaning at all angles, making your cleaning more customizable. The Straight White Large Brush is ideal for narrow spaces, such as in between bars or beams. The Half Round Vac Brush is designed for cleaning 4" (100mm) pipes or ducts, and the Small Sidewinder Brush is perfect for window sills and beams, featuring a pivot neck for reaching all angles.

Key Features:

• Compatible with the SkyVac® Elite Poles with the use of the conversion tube (included)
• Sturdy, durable tool kit, essential for high level internal cleaning
• Effectively cleans hard to reach areas

Included Items

• 155° Carbon Fiber Tool Holder
• 65° Carbon Fiber Tool Holder
• Half Round Vac Brush- up to 4" pipe brush
• Small Round Brush - Outer Diameter 3"
• Small Flexi Brush- 8" and flex from side-to-side, thick natural hair bristles
• Crevice tool 
  
• Pivot Black Brush - Bristles are 5" Length, 2" Width in the middle and tapers down on each end to create a diamond shape. Also Pivots to a 90° Angle
• Straight White Brush
• Elite Pole Connector / Adaptor
  

Specifications

Material: carbon fiber tool holders

SkyVac® offers a wide variety of end attachments for gutter cleaning.

The Aluminium Long Dirt Breaker Tool effectively breaks apart dirt to make cleaning quicker and easier.

It allows the debris to be vacuumed up with ease, and the added length allows for extended reach into deeper gutters and downpipes. The slanted aluminium end efficiently breaks down turf and deep-rooted blockages, for easy moss removal. 

It is tough on stubborn clumps yet still suitable for general suction cleaning needs.

Key Features:

• Compatible with Elite Poles, simply connect with the Rigid Neck Tool Holder
• For use with the skyVac® Industrial 85 and Interceptor
• An ideal addition for any gutter cleaning job

Please Note: The Elite Pole and Rigid Neck attachment shown are for illustration purposes only and are not included with this item.

Video

Disclaimer: This video is the property of its original creator or manufacturer and is provided here for informational purposes only. Clean Direct does not claim any rights to this content and is not responsible for its accuracy or representations.

Included Items

 1 x long dirt breaker

Specifications

Length is 17" (430mm)

SkyVac® offers a wide variety of end attachments for gutter cleaning. This Elite tool is used for daily gutter cleaning and is softer on metal gutters to prevent scratching inside the gutter run.

The SkyVac®️ Elite Tapered Aluminum Reducer Tool makes accessing tight and narrow spaces in the gutter easier. Gain access to smaller spaces in the gutter.

*Please Note: The Elite Pole shown in the second image is for illustration purposes only and is NOT included with this item*

Attach to your Rigid Neck Tool Holder and easily reach the more difficult spaces in the gutter.

Made from durable aluminum, this tool is a useful, robust addition to your attachment kit.

Key Features:

• Compatible with Elite Poles and Rigid Neck Tool Holder
• Use with the SkyVac® Industrial 85 and Interceptor
• Its tapered end gives you more precise cleaning

Video

Included Items

1 x Aluminum Reducer Tool

Specifications:

• 12" Long (300mm)
• Reduces to less than an inch (25mm) aperture

NEW: Ideal for directly overhead gutter cleaning projects with restricted access such as narrow pathways. Engineered from carbon fiber, the SkyVac® Elite Rigid Neck 180° Tool holder is lightweight and rigid allowing the user greater control and maneuverability and is compatible with the SkyVac® Elite pole system.

Please Note: The SkyVac® Elite pole and tool featured are for illustrative purposes only and are not included.

Features & Benefits

Compatible with the Elite Pole system, the Rigid Neck 180° Tool holder enables the user to directly access overhead gutter cleaning projects in tight locations.

• Made from durable and long-lasting robust carbon fiber
• Compatible with the Elite Poles only
• Holds a range of SkyVac® end tools for optimum gutter cleaning

Video

Included Items

1 x SkyVac® Elite Rigid Neck 180° Tool holder

Specifications

• Material: Carbon Fiber
• Dimensions: Approx. 15in x 14in x 2in
• Angle: 180° 

NEW: Ideal for accessing hard to reach valley gutters while working at height. The SkyVac® Elite Rigid Neck 90° Tool holder is lightweight and rigid allowing the user greater control and maneuverability and is compatible with the SkyVac® Elite pole system.

Please Note: The SkyVac® Elite pole and tool featured are for illustrative purposes only and are not included.

Compatible with the Elite Pole system, the Rigid Neck 90° Tool holder can be securely clamped in place in the Elite pole. Select the appropriate end tool for the project and clamp securely in place.

• Made from durable and long-lasting robust carbon fiber
• Compatible with the Elite Poles only
• For high-level gutter clearing of out of reach valley gutters while working at valley gutter height.

Photocredits: Above and Beyond Window Cleaning @aboveandbeyondwindowcleaning

Video

Included Items

1 x SkyVac® Elite Rigid Neck 90° Tool holder

Compatible with the SkyVac® Elite pole system and tools (Not Included)

Specifications

• Material: Carbon Fiber
• Dimensions: Approx. 12in x 28in x 2 cm
• Angle: 90°

SkyVac® offers a wide variety of end attachments for gutter cleaning. Here you can order single individual attachments and accessories.

This is the white bristled, elongated finger brush that tapers up to a point.

You can also buy this as an Internal Brush Set.